Sale!

GATE TITAN V2 Basic Module (Rear Wired) (TTN2 – BMR2)

Original price was: $96.99.Current price is: $29.09.

TITAN V2 is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V3 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions..
Basic Set:
The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade
TITAN gives you the option to adjust:

Trigger sensitivity

Pre-cocking boost

Fire selector mode

Burst mode

Rate of fire

Low battery warning

Battery protection

Sniper delay
TITAN has no less than eight sensors!

1 gear sensor

2 selector sensors

5 trigger sensors
Thanks to the gear sensor you get:

Automatic BURST – there is no need to set burst time. You can set burst between two and 10 shots;

Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;

FULL CYCLE – when the precocking is off, TITAN ensures that the gearbox always makes full cycles.
You can trust TITAN because:

Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.

It is protected against short-circuits, overheating and overloading

It protects the battery against over-discharge

It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)

It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)
Why TITAN is so special?

It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station

It has option to make firmware updates via the internet

It has innovative optical sensors instead of mechanical switches that can be prone to faults

It replicates a trigger response like in a real gun

It replaces the cut-off lever

It is compatible with DSG and SSG gears

It is compatible with most v2 gearboxes (including cnc) on the market without any modification
Kit contents:
TITAN Drop-in Version 2 Module
Installation Kit
Quickstart Guides
Here’s a link to its manual which is available in English, Spanish, French, Italian and Polish:
.manuals

Description

TITAN V2 is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V3 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions..
Basic Set:
The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade
TITAN gives you the option to adjust:

Trigger sensitivity

Pre-cocking boost

Fire selector mode

Burst mode

Rate of fire

Low battery warning

Battery protection

Sniper delay
TITAN has no less than eight sensors!

1 gear sensor

2 selector sensors

5 trigger sensors
Thanks to the gear sensor you get:

Automatic BURST – there is no need to set burst time. You can set burst between two and 10 shots;

Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;

FULL CYCLE – when the precocking is off, TITAN ensures that the gearbox always makes full cycles.
You can trust TITAN because:

Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.

It is protected against short-circuits, overheating and overloading

It protects the battery against over-discharge

It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)

It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)
Why TITAN is so special?

It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station

It has option to make firmware updates via the internet

It has innovative optical sensors instead of mechanical switches that can be prone to faults

It replicates a trigger response like in a real gun

It replaces the cut-off lever

It is compatible with DSG and SSG gears

It is compatible with most v2 gearboxes (including cnc) on the market without any modification
Kit contents:
TITAN Drop-in Version 2 Module
Installation Kit
Quickstart Guides
Here’s a link to its manual which is available in English, Spanish, French, Italian and Polish:
.manuals

Reviews

There are no reviews yet.

Be the first to review “GATE TITAN V2 Basic Module (Rear Wired) (TTN2 – BMR2)”

Your email address will not be published. Required fields are marked *